Electronics Technology (ETR) at Camp Community College
Distance Learning
Time of Day
Term
- ETR 106 - Programming Methods for Electrical/Electronic Calcula.
- Teaches the application of a high-level language to electrical and electronic problem solving and circuit analysis. Introduces an operating system.Lecture 1-2 hours. Laboratory 3-6 hours. Total 4-7 hours per week.
2-3 credits - ETR 113 - D.C. and A.C. Fundamentals I
- Studies D.C. and A.C. circuits, basic electrical components, instruments, network theorems, and techniques used to predict, analyze and measure electrical quantities. Part I of II.Lecture 2-3 hours. Laboratory 3 hours. Total 5-6 hours per week.
3-4 credits - ETR 114 - D.C. and A.C. Fundamentals II
- Studies D.C. and A.C. circuits, basic electrical components, instruments, network theorems, and techniques used to predict, analyze and measure electrical quantities. Part II of II.Lecture 2-3 hours. Laboratory 3 hours. Total 5-6 hours per week.
3-4 credits - ETR 115 - D.C. and A.C. Circuits
- Studies current flow in direct and alternating current circuits with emphasis upon practical problems. Reviews mathematics used in circuit calculations. Introduces concepts of resistance, capacitance, inductance and magnetism. Focuses on electronics/circuits application.Lecture 3-4 hours per week.
3-4 credits - ETR 123 - Electronic Applications I
- Provides laboratory and shop experience as applied to basic electronic devices, circuits and systems with emphasis on practical measurements. Part I of II.Lecture 0-1 hours. Laboratory 2-6 hours. Total 2-6 hours per week.
1-2 credits - ETR 124 - Electronic Applications II
- Provides laboratory and shop experience as applied to basic electronic devices, circuits and systems with emphasis on practical measurements. Part II of II.Lecture 0-1 hours. Laboratory 2-6 hours. Total 2-6 hours per week.
1-2 credits - ETR 144 - Devices and Applications II
- Teaches theory of active devices and circuits such as diodes, power supplies, transistors (BJTs), amplifiers and their parameters, FETs, and operational amplifiers. May include UJTs, oscillators, RF amplifiers, thermionic devices and others. Part II of II.Lecture 2-3 hours. Laboratory 3 hours. Total 5-6 hours per week.
Co-requisite: knowledge of D.C./A.C. theory or permission of instructor.3-4 credits - ETR 148 - Amplifiers and Integrated Circuits
- Studies devices and amplifiers with emphasis on analysis and design. May include summing and integrating amplifiers, choppers, modulators and other circuits.Lecture 3 hours. Laboratory 3 hours. Total 6 hours per week.
4 credits - ETR 149 - PC Repair
- Teaches the maintenance, troubleshooting and repair of personal computer systems. Uses IBM or compatible computer systems to provide fault isolation drill and practice.Lecture 1-2 hours. Laboratory 2-6 hours. Total 3-7 hours per week.
2-3 credits - ETR 150 - Machine Control Using Relay & Programmable Logic
- Provides an introduction to hardwired relay logic and the programmable logic controller (PLC) as utilized in a variety of different control tasks. Covers different types of inputs and outputs in control system. Teaches practical troubleshooting strategies.Lecture 2 hours. Laboratory 2 hours. Total 4 hours per week.
3 credits - ETR 160 - Survey of Microprocessors
- Provides an overview of microprocessor architecture, basic machine language programming, and I/O devices.Lecture 3 hours. Laboratory 3 hours. Total 6 hours per week.
4 credits - ETR 167 - Logic Circuits and Systems
- Studies digital switching and logic circuits, numbering systems, Boolean algebra, logic gates and families. Includes fundamental concepts of microprocessor operation and interface circuitry.Lecture 2-3 hours. Laboratory 3 hours. Total 5-6 hours per week.
3-4 credits - ETR 193 - Studies In
- Covers new content not covered in existing courses in the discipline. Allows instructor to explore content and instructional methods to assess the course's viability as a permanent offering.Variable hours per week.
1-5 credits - ETR 195 - Topics In
- Provides an opportunity to explore topical areas of interest to or needed by students.May be used also for special honors courses. May be repeated for credit. Variable hours.
1-5 credits - ETR 197 - Cooperative Education
- Supervises in on-the-job training for pay in approved business, industrial and service firms, coordinated by the college's cooperative education office. Is applicable to all occupational- technical curricula at the discretion of the college.Credit/work ratio not to exceed 1:5 hours. May be repeated for credit. Variable hours.
1-5 credits - ETR 199 - Supervised Study
- Assigns problems for independent study incorporating previous instruction and supervised by the instructor.May be repeated for credit. Variable hours.
1-5 credits - ETR 203 - Electronic Devices I
- Studies active devices and circuits such as diodes, power supplies, transistors, amplifiers and others. Part I of II.Lecture 2-3 hours. Laboratory 3 hours. Total 5-6 hours per week.
Prerequisite: Knowledge of D.C./A.C. theory.3-4 credits - ETR 204 - Electronic Devices II
- Studies active devices and circuits such as diodes, power supplies, transistors, amplifiers and others. Part II of II.Lecture 2-3 hours. Laboratory 3 hours. Total 5-6 hours per week.
Prerequisite: Knowledge of D.C./A.C. theory.3-4 credits - ETR 221 - Electronic Controls I
- Discusses characteristics and performance of linear control systems with one or more feedback loops. Includes functions and properties of various components encountered in control systems including servo-amplifiers and error detectors, machine synchronization for automatic operations. Part I of II.Lecture 3 hours. Laboratory 3 hours. Total 6 hours per week.
4 credits - ETR 241 - Electronic Communications I
- Studies noise, information and bandwidth, modulation and demodulation, transmitters and receivers, wave propagation, antennas and transmission lines. Includes broad band communication systems, microwave, both terrestrial and satellite, fiber optics, multiplexing and associated hardware. Part I of II.Lecture 2-3 hours. Laboratory 3 hours. Total 5-6 hours per week.
3-4 credits - ETR 242 - Electronic Communications II
- Studies noise, information and bandwidth, modulation and demodulation, transmitters and receivers, wave propagation, antennas and transmission lines. Includes broad band communication systems, microwave, both terrestrial and satellite, fiber optics, multiplexing and associated hardware. Part II of II.Lecture 2-3 hours. Laboratory 3 hours. Total 5-6 hours per week.
3-4 credits - ETR 250 - Solid State Circuits
- Teaches theory and application of amplifiers and oscillators. Includes amplifier circuit configurations, amplifier classes, operational amplifiers, power amplifiers, bandwidth distortion, and principles of feedback.Lecture 3 hours. Laboratory 3 hours. Total 6 hours per week.
Prerequisite: Knowledge of D.C./A.C. theory, and active devices and circuits.4 credits - ETR 261 - Microprocessor Application I
- Teaches the fundamentals of microprocessors including architecture, internal operations, memory, I/O devices machine level programming and interfacing. Emphasizes instrumentation and microprocessor. Part I of II.Lecture 2-3 hours. Laboratory 3 hours. Total 5-6 hours per week.
3-4 credits - ETR 266 - Microprocessor Applications
- Teaches fundamentals of microprocessors including architecture, internal operations, memory, I/O devices, machine level programming and interfacing.Lecture 3 hours per week.
3 credits - ETR 273 - Computer Electronics I
- Teaches principles of digital electronics and microprocessors to familiarize the student with typical circuits and methods used to interface computer and/or controllers with various I/O devices. Includes exposure to high level programming as well as assembly language routines. Part I of II.Lecture 2-3 hours. Laboratory 2-3 hours. Total 4-5 hours per week.
3-4 credits - ETR 274 - Computer Electronics II
- Teaches principles of digital electronics and microprocessors to familiarize the student with typical circuits and methods used to interface computer and/or controllers with various I/O devices. Includes exposure to high level programming as well as assembly language routines. Part II of II.Lecture 2-3 hours. Laboratory 2-3 hours. Total 4-5 hours per week.
3-4 credits - ETR 278 - Computer Interfacing and Circuitry
- Deals with typical circuitry used to interface computers with the outside world.Lecture 3 hours. Laboratory 3 hours. Total 6 hours per week.
4 credits - ETR 279 - Digital Principles, Terminology and Applications
- Studies digital principles, terminology and applications covering number systems, arithmetic, Boolean algebra, Karnaugh maps and advanced logic circuits. Includes the study of registers, encoding and decoding, and multiplexing; A/D, D/A, displays and others.Lecture 3 hours. Laboratory 3 hours. Total 6 hours per week.
4 credits - ETR 280 - Introduction to Digital Logic Circuits and Computers
- Studies digital logic, Boolean algebra, and arithmetic circuits, using standard integrated circuits and the functional block approach. Introduces concepts of computers, the internal operation and control language.Lecture 3 hours. Laboratory 3 hours. Total 6 hours per week.
4 credits - ETR 281 - Digital Systems
- Includes basic numbering systems, Boolean algebra, logic circuits and systems, pulse circuits and pulse logic systems as applied to computer and microprocessor technology.Lecture 2 hours. Laboratory 3 hours. Total 5 hours per week.
3 credits - ETR 285 - Fundamentals of Microcomputer Repair
- Provides the student with an exposure to the various techniques and procedures used to troubleshoot a microcomputer. May include an overview of a particular microprocessor system, use of isolation flow charts, test point charts, prints, diagnostic routines, component testing and fault isolation labs.Lecture 3 hours. Laboratory 3 hours. Total 6 hours per week.
4 credits - ETR 286 - Principles and Applications of Robotics
- Provides an overview of terminology, principles, practices, and applications of robotics. Studies development, programming; hydraulic, pneumatic, electronic controls; sensors, and system troubleshooting.Lecture 1-2 hours. Laboratory 2 hours. Total 3-4 hours per week.
2-3 credits - ETR 290 - Coordinated Internship
- Supervises on-the-job training in selected business, industrial or service firms coordinated by the college.Credit/practice ratio not to exceed 1:5 hours. May be repeated for credit. Variable hours.
1-5 credits - ETR 297 - Cooperative Education
- Supervises in on-the-job training for pay in approved business, industrial and service firms, coordinated by the college's cooperative education office. Is applicable to all occupational- technical curricula at the discretion of the college.Credit/work ratio not to exceed 1:5 hours. May be repeated for credit. Variable hours.
1-6 credits