- ETR 98 - Seminar and Project
-
Requires completion of a project or research report related to the student's occupational objectives and a study of approaches to the selection and pursuit of career opportunities in the field.
May be repeated for credit. Variable hours.
1-5 credits
- ETR 99 - Supervised Study
-
Assigns problems for independent study incorporating previous instruction and supervised by the instructor.
May be repeated for credit. Variable hours.
1-5 credits
- ETR 106 - Programming Methods for Electrical/Electronic Calcula.
-
Teaches the application of a high-level language to electrical and electronic problem solving and circuit analysis. Introduces an operating system.
Lecture 1-2 hours. Laboratory 3-6 hours. Total 4-7 hours per week.
2-3 credits
- ETR 107 - Programming Applications for ELE/ETR Calculations
-
Focuses on applications of a computer language(s) to electrical/ electronic problem solving and circuit analysis. Requires the preparation of a computer program(s) meeting problem specifications.
Lecture 2-3 hours. Laboratory 2-4 hours. Total 4-6 hours per week.
3-4 credits
- ETR 113 - D.C. and A.C. Fundamentals I
-
Studies D.C. and A.C. circuits, basic electrical components, instruments, network theorems, and techniques used to predict, analyze and measure electrical quantities. Part I of II.
Lecture 2-3 hours. Laboratory 3 hours. Total 5-6 hours per week.
3-4 credits
- ETR 114 - D.C. and A.C. Fundamentals II
-
Studies D.C. and A.C. circuits, basic electrical components, instruments, network theorems, and techniques used to predict, analyze and measure electrical quantities. Part II of II.
Lecture 2-3 hours. Laboratory 3 hours. Total 5-6 hours per week.
3-4 credits
- ETR 144 - Devices and Applications II
-
Teaches theory of active devices and circuits such as diodes, power suppies, transistors (BJTs), amplifiers and their parameters, FETs, and operational amplifiers. May include UJTs, oscillators, RF amplifiers, thermionic devices and others. Corequisite: knowledge of D.C./A.C. theory or permission of instructor. Part II of II.
Lecture 2-3 hours. Laboratory 3 hours. Total 5-6 hours per week.
3-4 credits
- ETR 158 - Electronic Circuits for Computers
-
Studies the basic electrical and electronic principles used in repair and troubleshooting of computer systems. Includes Ohm's and Kirchoff's laws, capacitor and diode circuit analysis, power supply circuits, and transistor fundamentals. Use of laboratory equipment (oscilloscope and DMM) is stressed.
Lecture 3 hours. Laboratory 3 hours. Total 6 hours per week.
4 credits
- ETR 159 - Microcomputer Peripherals
-
Covers basic knowledge of typical peripheral devices found in a microcomputer system. Includes devices such as printer, disk drive, CRT monitor, and keyboard. Emphasizes troubleshooting techniques.
Lecture 3 hours. Laboratory 3 hours. Total 6 hours per week.
4 credits
- ETR 167 - Logic Circuits and Systems
-
Studies digital switching and logic circuits, numbering systems, Boolean algebra, logic gates and families. Includes fundamental concepts of microprocessor operation and interface circuitry.
Lecture 2-3 hours. Laboratory 3 hours. Total 5-6 hours per week.
3-4 credits
- ETR 190 - Coordinated Internship
-
Supervises on-the-job training in selected business, industrial or service firms coordinated by the college.
Credit/practice ratio not to exceed 1:5 hours. May be repeated for credit. Variable hours.
1-5 credits
- ETR 195 - Topics In
-
Provides an opportunity to explore topical areas of interest to or needed by students.
May be used also for special honors courses. May be repeated for credit. Variable hours.
1-5 credits
- ETR 197 - Cooperative Education
-
Supervises in on-the-job training for pay in approved business, industrial and service firms, coordinated by the college's cooperative education office. Is applicable to all occupational- technical curricula at the discretion of the college.
Credit/work ratio not to exceed 1:5 hours. May be repeated for credit. Variable hours.
1-5 credits
- ETR 198 - Seminar and Project
-
Requires completion of a project or research report related to the student's occupational objectives and a study of approaches to the selection and pursuit of career opportunities in the field.
May be repeated for credit. Variable hours.
1-5 credits
- ETR 199 - Supervised Study
-
Assigns problems for independent study incorporating previous instruction and supervised by the instructor.
May be repeated for credit. Variable hours.
1-5 credits
- ETR 219 - Introduction to Electrical Machines
-
Studies the construction, theory of operations and applications of AC and DC machines.
Lecture 2 hours. Laboratory 3 hours. Total 5 hours per week.
3 credits
- ETR 241 - Electronic Communications I
-
Studies noise, information and bandwidth, modulation and demodulation, transmitters and receivers, wave propagation, antennas and transmission lines. Includes broad band communication systems, microwave, both terrestrial and satellite, fiber optics, multiplexing and associated hardware. Part I of II.
Lecture 2-3 hours. Laboratory 3 hours. Total 5-6 hours per week.
3-4 credits
- ETR 250 - Solid State Circuits
-
Teaches theory and application of amplifiers and oscillators. Includes amplifier circuit configurations, amplifier classes, operational amplifiers, power amplifiers, bandwidth distortion, and principles of feedback. Prerequisite: Knowledge of D.C./A.C. theory, and active devices and circuits.
Lecture 3 hours. Laboratory 3 hours. Total 6 hours per week.
4 credits
- ETR 261 - Microprocessor Application I
-
Teaches the fundamentals of microprocessors including architecture, internal operations, memory, I/O devices machine level programming and interfacing. Emphasizes instrumentation and microprocessor. Part I of II.
Lecture 2-3 hours. Laboratory 3 hours. Total 5-6 hours per week.
3-4 credits
- ETR 285 - Fundamentals of Microcomputer Repair
-
Provides the student with an exposure to the various techniques and procedures used to troubleshoot a microcomputer. May include an overview of a particular microprocessor system, use of isolation flow charts, test point charts, prints, diagnostic routines, component testing and fault isolation labs.
Lecture 3 hours. Laboratory 3 hours. Total 6 hours per week.
4 credits
- ETR 290 - Coordinated Internship
-
Supervises on-the-job training in selected business, industrial or service firms coordinated by the college.
Credit/practice ratio not to exceed 1:5 hours. May be repeated for credit. Variable hours.
1-5 credits
- ETR 295 - Topics In
-
Provides an opportunity to explore topical areas of interest to or needed by students.
May be used also for special honors courses. May be repeated for credit. Variable hours.
1-5 credits
- ETR 297 - Cooperative Education
-
Supervises in on-the-job training for pay in approved business, industrial and service firms, coordinated by the college's cooperative education office. Is applicable to all occupational- technical curricula at the discretion of the college.
Credit/work ratio not to exceed 1:5 hours. May be repeated for credit. Variable hours.
1-6 credits
- ETR 298 - Seminar and Project
-
Requires completion of a project or research report related to the student's occupational objectives and a study of approaches to the selection and pursuit of career opportunities in the field.
May be repeated for credit. Variable hours.
1-5 credits
- ETR 299 - Supervised Study
-
Assigns problems for independent study incorporating previous instruction and supervised by the instructor.
May be repeated for credit. Variable hours.
1-5 credits
