Welding (WEL) at Central Virginia Community College


         
 
Advanced Search
Distance Learning
Restrict search to:
   Distance Learning Types
Time of Day
Restrict search to:
Term
Restrict search to:
WEL 100 - Fundamentals of Welding
Introduces arc and oxyfuel welding and cutting. Provides fundamental principles of joining ferrous and non-ferrous metals, welding and cutting processes, equipment operation, and safety procedures with emphasis upon welding and cutting procedures.
Lecture 2 hours. Laboratory 3-6 hours. Total 5-8 hours per week.
3-4 credits
WEL 116 - Welding I (Oxyacetylene)
Teaches oxygen/acetylene welding and cutting including safety of equipment, welding, brazing and soldering procedures and cutting procedures.
Lecture 1 hour. Laboratory 3 hours. Total 4 hours per week.
2 credits
WEL 117 - Oxyfuel Welding and Cutting
Introduces history of oxyacetylene welding, principles of welding and cutting, nomenclature of the equipment, development of the puddle, running flat beads, and butt welding in different positions. Explains silver brazing, silver and soft soldering, and safety procedures in the use of tools and equipment.
Lecture 2 hours. Laboratory 3-6 hours. Total 5-8 hours per week.
3-4 credits
WEL 120 - Introduction to Welding
Introduces history of welding processes. Covers types of equipment, and assembly of units. Stresses welding procedures such as fusion, non-fusion, and cutting oxyacetylene. Introduces arc welding and plasma arc cutting. Emphasizes procedures in the use of tools and equipment.
Lecture 1-2 hours. Laboratory 2-3 hours. Total 3-5 hours per week.
2-3 credits
WEL 120 Detailed Outline (VCCS Faculty & Staff Only) icon
WEL 121 - Arc Welding
Studies the operation of AC and DC power sources, weld heat, polarities, and electrodes for use in joining various alloys by the SMAW process. Covers welds in different types of joints and different welding positions. Emphasizes safety procedures.
Lecture 1 hour. Laboratory 3 hours. Total 4 hours per week.
2 credits
WEL 122 - Welding II (Electric Arc)
Teaches electric arc welding, including types of equipment, selection of electrodes, safety equipment and procedures, and principles and practices of welding.
Lecture 1-2 hours. Laboratory 3 hours. Total 4-5 hours per week.
2-3 credits
WEL 123 - Shielded Metal Arc Welding (Basic)
Teaches operation of AC and DC power sources, welding polarities, heats and electrodes for use in joining various metal alloys by the arc welding process. Deals with running beads, butt, and fillet welds in all positions. Emphasizes safety procedures.
Lecture 2 hours. Laboratory 3-6 hours. Total 5-8 hours per week.
3-4 credits
WEL 124 - Shielded Metal Arc Welding (Advanced)
Continues instruction on operation of AC and DC power sources, welding polarities, heats and electrodes for use in joining various metal alloys by the arc welding process. Deals with running beads, butt, and fillet welds in all positions. Emphasizes safety procedures.
Lecture 2 hours. Laboratory 3-6 hours. Total 5-8 hours per week.
3-4 credits
WEL 126 - Pipe Welding I
Teaches metal arc welding processes including the welding of pressure piping in the horizontal, vertical, and horizontal-fixed positions in accordance with section IX of the ASME code.
Lecture 2-3 hours. Laboratory 3 hours. Total 5-6 hours per week.
3-4 credits
WEL 127 - Pipe Welding II
Provides practice in the welding of pressure piping in the horizontal, vertical, and fixed positions.
Laboratory 9 hours per week.
3 credits
WEL 130 - Inert Gas Welding
Introduces practical operations in the uses of inert-gas- shield arc welding. Discusses equipment, safety operations, welding practice in the various positions, process applications, and manual and semi-automatic welding.
Lecture 2 hours. Laboratory 3-6 hours. Total 5-8 hours per week.
3-4 credits
WEL 136 - Welding III (Inert Gas)
Studies Tungsten and metallic inert gas procedures and practices including principles of operation, shielding gasses, filler rods, process variations and applications, manual and automatic welding, equipment and safety.
Lecture 1 hour. Laboratory 3 hours. Total 4 hours per week.
2 credits
WEL 138 - Pipe and Tube Welding
Develops entry level skills for the inert gas tungsten welding process (TIG) with emphasis upon thin and thick wall carbon and stainless piping and tubing.
Lecture 1 hour. Laboratory 3 hours. Total 4 hours per week.
Prerequisite: WEL 136 or Instructor Permission.
2 credits
WEL 138 Detailed Outline (VCCS Faculty & Staff Only) icon
WEL 141 - Welder Qualification Tests I
Studies techniques and practices of testing welded joints through destructive and non-destructive testing. Part I of II.
Lecture 2 hours. Laboratory 3-6 hours. Total 5-8 hours per week.
3-4 credits
WEL 142 - Welder Qualification Tests II
Studies techniques and practices of testing welded joints through destructive and non-destructive testing. Part II of II.
Lecture 2 hours. Laboratory 3-6 hours. Total 5-8 hours per week.
3-4 credits
WEL 145 - Welding Metallurgy
Studies steel classifications, heat treatment procedures, properties of ferrous and non-ferrous metals. Discusses techniques and practices of testing welded joints and destructive/nondestructive, visual magnetic and fluorescent testing.
Lecture 2-3 hours. Laboratory 1-2 hours. Total 3-5 hours per week.
3-4 credits
WEL 150 - Welding Drawing and Interpretation
Teaches fundamentals required for successful drafting as applied to the welding industry. Includes blueprint reading, geometric principles of drafting and freehand sketching, basic principles of orthographic projection, preparation of drawings and interpretation of symbols.
Lecture 2-3 hours per week.
2-3 credits
WEL 160 - Gas Metal Arc Welding
Introduces semi-automatic welding processes with emphasis on practical application. Includes the study of filler wires, fluxes, and gases.
Lecture 2 hours. Laboratory 3-6 hours. Total 5-8 hours per week.
3-4 credits
WEL 161 - Flux Cored Arc Welding (FCAW)
Introduces flux cored semi-automatic welding processes with emphasis on practical application. Includes the study of filler wires, fluxes, and gases.
Lecture 2 hours. Laboratory 3 hours. Total 5 hours per week.
3 credits
WEL 161 Detailed Outline (VCCS Faculty & Staff Only) icon
WEL 164 - Gas Tungsten Arc Welding (GTAW), Tungsten Inert Gas (TIG)
Introduces practical operations in the use of tungsten arc welding and equipment. Studies equipment operation setup, safety, and practice of Gas Tungsten Arc Welding (GTAW), Tungsten Inert Gas (TIG).
Lecture 2 hours. Laboratory 3 hours. Total 5 hours per week.
3 credits
WEL 164 Detailed Outline (VCCS Faculty & Staff Only) icon
WEL 166 - Advanced Gas Tungsten Arc Welding (GTAW), Tungsten Inert Gas (TIG)
Continues practical operations in the use of tungsten arc welding and equipment. Studies equipment operation setup, safety, and practice of Gas Tungsten Arc Welding (GTAW), Tungsten Inert Gas (TIG).
Lecture 2 hours. Laboratory 3 hours. Total 5 hours per week.
Prerequisite: WEL 164
3 credits
WEL 166 Detailed Outline (VCCS Faculty & Staff Only) icon
WEL 175 - Semi-Automatic Processes
Introduces Semi Automatic Processes performed with Carbon Steel. Emphasizes practical applications in field techniques. Includes the study of filler wires, fluxes and cover gasses.
Lecture 2 hours. Laboratory 3-6 hours. Total 5-8 hours per week.
3-4 credits
WEL 175 Detailed Outline (VCCS Faculty & Staff Only) icon
WEL 190 - Coordinated Internship
Supervises on-the-job training in selected business, industrial or service firms coordinated by the college.
Credit/practice ratio not to exceed 1:5 hours. May be repeated for credit. Variable hours.
1-5 credits
WEL 193 - Studies In
Covers new content not covered in existing courses in the discipline. Allows instructor to explore content and instructional methods to assess the course's viability as a permanent offering.
Variable hours per week.
1-5 credits
WEL 195 - Topics In
Provides an opportunity to explore topical areas of interest to or needed by students.
May be used also for special honors courses. May be repeated for credit. Variable hours.
1-5 credits
WEL 197 - Cooperative Education
Supervises in on-the-job training for pay in approved business, industrial and service firms, coordinated by the college's cooperative education office. Is applicable to all occupational- technical curricula at the discretion of the college.
Credit/work ratio not to exceed 1:5 hours. May be repeated for credit. Variable hours.
1-5 credits
WEL 198 - Seminar and Project
Requires completion of a project or research report related to the student's occupational objectives and a study of approaches to the selection and pursuit of career opportunities in the field.
May be repeated for credit. Variable hours.
1-5 credits
WEL 199 - Supervised Study
Assigns problems for independent study incorporating previous instruction and supervised by the instructor.
May be repeated for credit. Variable hours.
1-5 credits
WEL 241 - Robotic Welding I
Examines safety, setup, programming, and operation of a welding robot. Covers variables and problems in addition to solutions applied to provide a practical and efficient application of the Gas Metal Arc Welding (GMAW) process to an automated system. (Part I of II)
Lecture 1 hour, Laboratory 3 hours, Total 4 hours per week.
2 credits
WEL 241 Detailed Outline (VCCS Faculty & Staff Only) icon
WEL 247 - Welding Layout and Fabrication I
Introduces student to project layout from shop sketches/blueprints, developing templates/patterns and the use of fabrication tools. Covers the safe operation of different types of manual metal fabrication equipment used in the industry. Examines safe and efficient use of the manual metal shear, metal roller, metal break and other fabrication. (Part I of II)
Lecture 1 hour, Laboratory 3 hours, Total 4 hours per week.
Prerequisite: WEL 150
2 credits
WEL 247 Detailed Outline (VCCS Faculty & Staff Only) icon
WEL 295 - Topics In
Provides an opportunity to explore topical areas of interest to or needed by students.
May be used also for special honors courses. May be repeated for credit. Variable hours.
1-5 credits
WEL 297 - Cooperative Education
Supervises in on-the-job training for pay in approved business, industrial and service firms, coordinated by the college's cooperative education office. Is applicable to all occupational- technical curricula at the discretion of the college.
Credit/work ratio not to exceed 1:5 hours. May be repeated for credit. Variable hours.
1-5 credits
WEL 299 - Supervised Study
Assigns problems for independent study incorporating previous instruction and supervised by the instructor.
May be repeated for credit. Variable hours.
1-5 credits