Electronics Technology (ETR) at Rappahannock Community College


         
 
Advanced Search
Distance Learning
Restrict search to:
   Distance Learning Types
Time of Day
Restrict search to:
Term
Restrict search to:
ETR 112 - Math Applications for ELE/ETR Analysis
Presents mathematical applications for ELE/ETR students. Includes mathematical concepts and problems in algebra and trigonometry, and direct application to electronic analysis. Includes a survey of advanced mathematics to develop and reinforce electronic concepts.
Lecture 1 hour. Laboratory 2 hours. Total 3 hours per week.
2 credits
ETR 113 - D.C. and A.C. Fundamentals I
Studies D.C. and A.C. circuits, basic electrical components, instruments, network theorems, and techniques used to predict, analyze and measure electrical quantities. Part I of II.
Lecture 2-3 hours. Laboratory 3 hours. Total 5-6 hours per week.
3-4 credits
ETR 114 - D.C. and A.C. Fundamentals II
Studies D.C. and A.C. circuits, basic electrical components, instruments, network theorems, and techniques used to predict, analyze and measure electrical quantities. Part II of II.
Lecture 2-3 hours. Laboratory 3 hours. Total 5-6 hours per week.
3-4 credits
ETR 115 - D.C. and A.C. Circuits
Studies current flow in direct and alternating current circuits with emphasis upon practical problems. Reviews mathematics used in circuit calculations. Introduces concepts of resistance, capacitance, inductance and magnetism. Focuses on electronics/circuits application.
Lecture 3-4 hours per week.
3-4 credits
ETR 123 - Electronic Applications I
Provides laboratory and shop experience as applied to basic electronic devices, circuits and systems with emphasis on practical measurements. Part I of II.
Lecture 0-1 hours. Laboratory 2-6 hours. Total 2-6 hours per week.
1-2 credits
ETR 136 - General Industrial Electronic Systems
Studies devices, circuits, power modules, analog and digital, open and closed loop control and servo systems. May include laboratory projects and modular troubleshooting.
Lecture 2 hours. Laboratory 3 hours. Total 5 hours per week.
3 credits
ETR 140 - Introduction to Mechatronics
Presents foundational concepts in mechatronics including analog and digital electronics, sensors, actuators, microprocessors, and microprocessor interfacing to electromechanical systems. Surveys components and measurement equipment used in the design, installation, and repair of mechatronic equipment and circuits. This course is cross-listed with MEC 140. Credit will not be awarded for both.
Lecture 2 hours. Laboratory 2 hours. Total 4 hours per week.
3 credits
ETR 140 Detailed Outline (VCCS Faculty & Staff Only) icon
ETR 141 - Electronics I
Introduces electronic devices as applied to basic electronic circuits and systems. Part I of II.
Lecture 3 hours per week.
3 credits
ETR 142 - Electronics II
Introduces electronic devices as applied to basic electronic circuits and systems. Part II of II.
Lecture 3 hours per week.
3 credits
ETR 143 - Devices and Applications I
Teaches theory of active devices and circuits such as diodes, power supplies, transistors (BJTs), amplifiers and their parameters, FETs, and operational amplifiers. May include UJTs, oscillators, RF amplifiers, thermionic devices and others. Part I of II.
Lecture 2-3 hours. Laboratory 3 hours. Total 5-6 hours per week.
Co-requisite: knowledge of D.C./A.C. theory or permission of instructor.
3-4 credits
ETR 144 - Devices and Applications II
Teaches theory of active devices and circuits such as diodes, power supplies, transistors (BJTs), amplifiers and their parameters, FETs, and operational amplifiers. May include UJTs, oscillators, RF amplifiers, thermionic devices and others. Part II of II.
Lecture 2-3 hours. Laboratory 3 hours. Total 5-6 hours per week.
Co-requisite: knowledge of D.C./A.C. theory or permission of instructor.
3-4 credits
ETR 148 - Amplifiers and Integrated Circuits
Studies devices and amplifiers with emphasis on analysis and design. May include summing and integrating amplifiers, choppers, modulators and other circuits.
Lecture 3 hours. Laboratory 3 hours. Total 6 hours per week.
4 credits
ETR 149 - PC Repair
Teaches the maintenance, troubleshooting and repair of personal computer systems. Uses IBM or compatible computer systems to provide fault isolation drill and practice.
Lecture 1-2 hours. Laboratory 2-6 hours. Total 3-7 hours per week.
2-3 credits
ETR 150 - Machine Control Using Relay & Programmable Logic
Provides an introduction to hardwired relay logic and the programmable logic controller (PLC) as utilized in a variety of different control tasks. Covers different types of inputs and outputs in control system. Teaches practical troubleshooting strategies.
Lecture 2 hours. Laboratory 2 hours. Total 4 hours per week.
3 credits
ETR 151 - Electronic Circuits and Troubleshooting I
Studies analog and digital circuits and systems with standard circuit test and troubleshooting procedures. Part I of II.
Lecture 2 hours per week.
2 credits
ETR 152 - Electronic Circuits and Troubleshooting II
Studies analog and digital circuits and systems with standard circuit test and troubleshooting procedures. Part II of II.
Lecture 2 hours per week.
2 credits
ETR 160 - Survey of Microprocessors
Provides an overview of microprocessor architecture, basic machine language programming, and I/O devices.
Lecture 3 hours. Laboratory 3 hours. Total 6 hours per week.
4 credits
ETR 164 - Upgrading and Maintaining PC Hardware
Teaches upgrading of the system CPU, memory, drives, multimedia components, modem, and video card in a microcomputer. Covers hardware as well as software related maintenance issues.
Lecture 2 hours. Laboratory 2-3 hours. Total 4-5 hours per week.
3 credits
ETR 166 - Fundamentals of Computer Technology
Introduces computer use and literacy. Includes operating systems, high level language programming, word processors, spreadsheets and other generic software. Uses engineering terms, standards and methods.
Lecture 2-3 hours. Laboratory 1-3 hours. Total 3-6 hours per week.
3-4 credits
ETR 168 - Digital Circuit Fundamentals
Covers the fundamentals of digital logic and the study of digital circuits and their applications.
Lecture 2-3 hours per week.
2-3 credits
ETR 197 - Cooperative Education
Supervises in on-the-job training for pay in approved business, industrial and service firms, coordinated by the college's cooperative education office. Is applicable to all occupational- technical curricula at the discretion of the college.
Credit/work ratio not to exceed 1:5 hours. May be repeated for credit. Variable hours.
1-5 credits
ETR 198 - Seminar and Project
Requires completion of a project or research report related to the student's occupational objectives and a study of approaches to the selection and pursuit of career opportunities in the field.
May be repeated for credit. Variable hours.
1-5 credits
ETR 199 - Supervised Study
Assigns problems for independent study incorporating previous instruction and supervised by the instructor.
May be repeated for credit. Variable hours.
1-5 credits
ETR 203 - Electronic Devices I
Studies active devices and circuits such as diodes, power supplies, transistors, amplifiers and others. Part I of II.
Lecture 2-3 hours. Laboratory 3 hours. Total 5-6 hours per week.
Prerequisite: Knowledge of D.C./A.C. theory.
3-4 credits
ETR 204 - Electronic Devices II
Studies active devices and circuits such as diodes, power supplies, transistors, amplifiers and others. Part II of II.
Lecture 2-3 hours. Laboratory 3 hours. Total 5-6 hours per week.
Prerequisite: Knowledge of D.C./A.C. theory.
3-4 credits
ETR 211 - Electronics Diagnostics I
Teaches analyzing, testing and repair of fundamental assemblies, subassemblies, circuits and systems as applied to electronic maintenance and manufacturing. Part I of II.
Lecture 2 hours. Laboratory 3-6 hours. Total 5-8 hours per week.
3-4 credits
ETR 225 - Data Communications
Studies computer communication devices including configurations and protocols. May include modems multiplexing, teletex and interfacing with telecommunication systems such as local and area networks, microwave and satellite and delivery systems, fiber optic systems and packet systems.
Lecture 3-4 hours. Laboratory 1-6 hours. Total 4-9 hours per week.
4-5 credits
ETR 228 - Computer Troubleshooting and Repair
Teaches procedures for isolating and correcting problems in computers and computer-related hardware. Emphasizes operational concepts, use of diagnostic software and troubleshooting equipment.
Lecture 1-3 hours. Laboratory 3-6 hours. Total 6-7 hours per week.
3-4 credits
ETR 230 - Mechatronic Process Control
Studies systems integrating mechanical components with electrical components and logic devices used to control manufacturing operations. Surveys electromechanical actuators, sensors, digital to analog conversion, and methods of computer control as related to the managing and monitoring of manufacturing processes.
Lecture 2 hours. Laboratory 2 hours. Total 4 hours per week.
Prerequisite: MEC 140 or divisional approval.
3 credits
ETR 237 - Industrial Electronics I
Studies linear integrated circuits for industrial applications, motors, industrial control devices, power control circuits, transducers, industrial process control, and sequential process control. Part I of II.
Lecture 2-3 hours. Laboratory 2-4 hours. Total 4-5 hours per week.
3-4 credits
ETR 241 - Electronic Communications I
Studies noise, information and bandwidth, modulation and demodulation, transmitters and receivers, wave propagation, antennas and transmission lines. Includes broad band communication systems, microwave, both terrestrial and satellite, fiber optics, multiplexing and associated hardware. Part I of II.
Lecture 2-3 hours. Laboratory 3 hours. Total 5-6 hours per week.
3-4 credits
ETR 242 - Electronic Communications II
Studies noise, information and bandwidth, modulation and demodulation, transmitters and receivers, wave propagation, antennas and transmission lines. Includes broad band communication systems, microwave, both terrestrial and satellite, fiber optics, multiplexing and associated hardware. Part II of II.
Lecture 2-3 hours. Laboratory 3 hours. Total 5-6 hours per week.
3-4 credits
ETR 249 - Electrical Control Systems
Studies components, equipment and circuits that are used to control the operation of electrical machines.
Lecture 3 hours. Laboratory 3 hours. Total 6 hours per week.
4 credits
ETR 250 - Solid State Circuits
Teaches theory and application of amplifiers and oscillators. Includes amplifier circuit configurations, amplifier classes, operational amplifiers, power amplifiers, bandwidth distortion, and principles of feedback.
Lecture 3 hours. Laboratory 3 hours. Total 6 hours per week.
Prerequisite: Knowledge of D.C./A.C. theory, and active devices and circuits.
4 credits
ETR 261 - Microprocessor Application I
Teaches the fundamentals of microprocessors including architecture, internal operations, memory, I/O devices machine level programming and interfacing. Emphasizes instrumentation and microprocessor. Part I of II.
Lecture 2-3 hours. Laboratory 3 hours. Total 5-6 hours per week.
3-4 credits
ETR 266 - Microprocessor Applications
Teaches fundamentals of microprocessors including architecture, internal operations, memory, I/O devices, machine level programming and interfacing.
Lecture 3 hours per week.
3 credits
ETR 271 - Microcomputer Electronics I
Deals with digital circuit devices and systems including number systems, Boolean algebra, logic circuits, arithmetic and logic operations, integrated circuits and digital IC families, D/A and A/D. Includes memory devices, microprocessor architecture, programming and applications in microcomputer based systems. Part I of II.
Lecture 3 hours. Laboratory 3 hours. Total 6 hours per week.
4 credits
ETR 273 - Computer Electronics I
Teaches principles of digital electronics and microprocessors to familiarize the student with typical circuits and methods used to interface computer and/or controllers with various I/O devices. Includes exposure to high level programming as well as assembly language routines. Part I of II.
Lecture 2-3 hours. Laboratory 2-3 hours. Total 4-5 hours per week.
3-4 credits
ETR 274 - Computer Electronics II
Teaches principles of digital electronics and microprocessors to familiarize the student with typical circuits and methods used to interface computer and/or controllers with various I/O devices. Includes exposure to high level programming as well as assembly language routines. Part II of II.
Lecture 2-3 hours. Laboratory 2-3 hours. Total 4-5 hours per week.
3-4 credits
ETR 279 - Digital Principles, Terminology and Applications
Studies digital principles, terminology and applications covering number systems, arithmetic, Boolean algebra, Karnaugh maps and advanced logic circuits. Includes the study of registers, encoding and decoding, and multiplexing; A/D, D/A, displays and others.
Lecture 3 hours. Laboratory 3 hours. Total 6 hours per week.
4 credits
ETR 280 - Introduction to Digital Logic Circuits and Computers
Studies digital logic, Boolean algebra, and arithmetic circuits, using standard integrated circuits and the functional block approach. Introduces concepts of computers, the internal operation and control language.
Lecture 3 hours. Laboratory 3 hours. Total 6 hours per week.
4 credits
ETR 281 - Digital Systems
Includes basic numbering systems, Boolean algebra, logic circuits and systems, pulse circuits and pulse logic systems as applied to computer and microprocessor technology.
Lecture 2 hours. Laboratory 3 hours. Total 5 hours per week.
3 credits
ETR 285 - Fundamentals of Microcomputer Repair
Provides the student with an exposure to the various techniques and procedures used to troubleshoot a microcomputer. May include an overview of a particular microprocessor system, use of isolation flow charts, test point charts, prints, diagnostic routines, component testing and fault isolation labs.
Lecture 3 hours. Laboratory 3 hours. Total 6 hours per week.
4 credits
ETR 286 - Principles and Applications of Robotics
Provides an overview of terminology, principles, practices, and applications of robotics. Studies development, programming; hydraulic, pneumatic, electronic controls; sensors, and system troubleshooting.
Lecture 1-2 hours. Laboratory 2 hours. Total 3-4 hours per week.
2-3 credits
ETR 295 - Topics In
Provides an opportunity to explore topical areas of interest to or needed by students.
May be used also for special honors courses. May be repeated for credit. Variable hours.
1-5 credits
ETR 297 - Cooperative Education
Supervises in on-the-job training for pay in approved business, industrial and service firms, coordinated by the college's cooperative education office. Is applicable to all occupational- technical curricula at the discretion of the college.
Credit/work ratio not to exceed 1:5 hours. May be repeated for credit. Variable hours.
1-6 credits
ETR 298 - Seminar and Project
Requires completion of a project or research report related to the student's occupational objectives and a study of approaches to the selection and pursuit of career opportunities in the field.
May be repeated for credit. Variable hours.
1-5 credits