Welding (WEL) at Mountain Gateway Community College
Distance Learning
Time of Day
Term
- WEL 21 - Shielded Metal Arc Welding I
- Presents the operation of AC and DC power sources. Teaches polarities, heats, and electrodes for use in joining various metal alloys by the arc welding process. Deals with running beads, butt and fillet welds in all positions, assessment of weld quality through visual inspection. Emphasizes safety procedures. Part I of II.Lecture 2 hours. Laboratory 3-12 hours. Total 5-14 hours per week.
3-6 credits - WEL 22 - Shielded Metal Arc Welding II
- Presents the operation of AC and DC power sources. Teaches polarities, heats, and electrodes for use in joining various metal alloys by the arc welding process. Deals with running beads, butt and fillet welds in all positions, assessment of weld quality through visual inspection. Emphasizes safety procedures. Part II of II.Lecture 2 hours. Laboratory 3-12 hours. Total 5-14 hours per week.
3-6 credits - WEL 90 - Coordinated Internship
- Supervises on-the-job training in selected business, industrial or service firms coordinated by the college.Credit/practice ratio not to exceed 1:5 hours. May be repeated for credit. Variable hours.
1-5 credits - WEL 95 - Topics In
- Provides an opportunity to explore topical areas of interest to or needed by students.May be used also for special honors courses. May be repeated for credit. Variable hours.
1-5 credits - WEL 96 - On-Site Training
- Specializes in career orientation and training program without pay in selected businesses and industry, supervised and coordinated by the college.Credit/work ratio not to exceed 1:5 hours. May be repeated for credit. Variable hours.
1-5 credits - WEL 97 - Cooperative Education
- Supervises in on-the-job training for pay in approved business, industrial and service firms, coordinated by the college's cooperative education office. Is applicable to all occupational- technical curricula at the discretion of the college.Credit/work ratio not to exceed 1:5 hours. May be repeated for credit. Variable hours.
1-5 credits - WEL 98 - Seminar and Project
- Requires completion of a project or research report related to the student's occupational objectives and a study of approaches to the selection and pursuit of career opportunities in the field.May be repeated for credit. Variable hours.
1-5 credits - WEL 99 - Supervised Study
- Assigns problems for independent study incorporating previous instruction and supervised by the instructor.May be repeated for credit. Variable hours.
1-5 credits - WEL 116 - Welding I (Oxyacetylene)
- Teaches oxygen/acetylene welding and cutting including safety of equipment, welding, brazing and soldering procedures and cutting procedures.Lecture 1 hour. Laboratory 3 hours. Total 4 hours per week.
2 credits - WEL 117 - Oxyfuel Welding and Cutting
- Introduces history of oxyacetylene welding, principles of welding and cutting, nomenclature of the equipment, development of the puddle, running flat beads, and butt welding in different positions. Explains silver brazing, silver and soft soldering, and safety procedures in the use of tools and equipment.Lecture 2 hours. Laboratory 3-6 hours. Total 5-8 hours per week.
3-4 credits - WEL 120 - Introduction to Welding
- Introduces history of welding processes. Covers types of equipment, and assembly of units. Stresses welding procedures such as fusion, non-fusion, and cutting oxyacetylene. Introduces arc welding and plasma arc cutting. Emphasizes procedures in the use of tools and equipment.Lecture 1-2 hours. Laboratory 2-3 hours. Total 3-5 hours per week.
2-3 credits - WEL 121 - Arc Welding
- Studies the operation of AC and DC power sources, weld heat, polarities, and electrodes for use in joining various alloys by the SMAW process. Covers welds in different types of joints and different welding positions. Emphasizes safety procedures.Lecture 1 hour. Laboratory 3 hours. Total 4 hours per week.
2 credits - WEL 123 - Shielded Metal Arc Welding (Basic)
- Teaches operation of AC and DC power sources, welding polarities, heats and electrodes for use in joining various metal alloys by the arc welding process. Deals with running beads, butt, and fillet welds in all positions. Emphasizes safety procedures.Lecture 2 hours. Laboratory 3-6 hours. Total 5-8 hours per week.
3-4 credits - WEL 124 - Shielded Metal Arc Welding (Advanced)
- Continues instruction on operation of AC and DC power sources, welding polarities, heats and electrodes for use in joining various metal alloys by the arc welding process. Deals with running beads, butt, and fillet welds in all positions. Emphasizes safety procedures.Lecture 2 hours. Laboratory 3-6 hours. Total 5-8 hours per week.
3-4 credits - WEL 125 - Shielded Metal Arc Welding Capstone
- Continuation of Shielded Metal Arc Welding (SMAW) instruction with emphasis on taking the American Welding Society's all position SMAW qualification test and continued instruction in carbon arc gouging.Lecture 0-1 hour. Laboratory 3 hours.Total 3-4 hours per week.
Prerequisite: WEL 123, Corequisite: WEL 1241-2 credits - WEL 126 - Pipe Welding I
- Teaches metal arc welding processes including the welding of pressure piping in the horizontal, vertical, and horizontal-fixed positions in accordance with section IX of the ASME code.Lecture 2-3 hours. Laboratory 3 hours. Total 5-6 hours per week.
3-4 credits - WEL 127 - Pipe Welding II
- Provides practice in the welding of pressure piping in the horizontal, vertical, and fixed positions.Laboratory 9 hours per week.
3 credits - WEL 130 - Inert Gas Welding
- Introduces practical operations in the uses of inert-gas- shield arc welding. Discusses equipment, safety operations, welding practice in the various positions, process applications, and manual and semi-automatic welding.Lecture 2 hours. Laboratory 3-6 hours. Total 5-8 hours per week.
3-4 credits - WEL 135 - Inert Gas Welding
- Introduces practical operations in use of inert gas shielded arc welding. Studies equipment operation, setup, safety and practice of GMAW (MIG) and GTAW (TIG).Lecture 1 hour. Laboratory 3 hours. Total 4 hours per week.
2 credits - WEL 136 - Welding III (Inert Gas)
- Studies Tungsten and metallic inert gas procedures and practices including principles of operation, shielding gasses, filler rods, process variations and applications, manual and automatic welding, equipment and safety.Lecture 1 hour. Laboratory 3 hours. Total 4 hours per week.
2 credits - WEL 138 - Pipe and Tube Welding
- Develops entry level skills for the inert gas tungsten welding process (TIG) with emphasis upon thin and thick wall carbon and stainless piping and tubing.Lecture 1 hour. Laboratory 3 hours. Total 4 hours per week.
Prerequisite: WEL 136 or Instructor Permission.2 credits - WEL 141 - Welder Qualification Tests I
- Studies techniques and practices of testing welded joints through destructive and non-destructive testing. Part I of II.Lecture 2 hours. Laboratory 3-6 hours. Total 5-8 hours per week.
3-4 credits - WEL 142 - Welder Qualification Tests II
- Studies techniques and practices of testing welded joints through destructive and non-destructive testing. Part II of II.Lecture 2 hours. Laboratory 3-6 hours. Total 5-8 hours per week.
3-4 credits - WEL 145 - Welding Metallurgy
- Studies steel classifications, heat treatment procedures, properties of ferrous and non-ferrous metals. Discusses techniques and practices of testing welded joints and destructive/nondestructive, visual magnetic and fluorescent testing.Lecture 2-3 hours. Laboratory 1-2 hours. Total 3-5 hours per week.
3-4 credits - WEL 146 - Welding Quality Control
- Teaches techniques and practices of inspection, and interpretation of tests and measurements. Includes radiographic tests of joints of unlimited thickness welded in 3G and 4G positions.Lecture 2 hours. Laboratory 3 hours. Total 5 hours per week.
3 credits - WEL 150 - Welding Drawing and Interpretation
- Teaches fundamentals required for successful drafting as applied to the welding industry. Includes blueprint reading, geometric principles of drafting and freehand sketching, basic principles of orthographic projection, preparation of drawings and interpretation of symbols.Lecture 2-3 hours per week.
2-3 credits - WEL 160 - Gas Metal Arc Welding
- Introduces semi-automatic welding processes with emphasis on practical application. Includes the study of filler wires, fluxes, and gases.Lecture 2 hours. Laboratory 3-6 hours. Total 5-8 hours per week.
3-4 credits - WEL 161 - Flux Cored Arc Welding (FCAW)
- Introduces flux cored semi-automatic welding processes with emphasis on practical application. Includes the study of filler wires, fluxes, and gases.Lecture 2 hours. Laboratory 3 hours. Total 5 hours per week.
3 credits - WEL 164 - Gas Tungsten Arc Welding (GTAW), Tungsten Inert Gas (TIG)
- Introduces practical operations in the use of tungsten arc welding and equipment. Studies equipment operation setup, safety, and practice of Gas Tungsten Arc Welding (GTAW), Tungsten Inert Gas (TIG).Lecture 2 hours. Laboratory 3 hours. Total 5 hours per week.
3 credits - WEL 166 - Advanced Gas Tungsten Arc Welding (GTAW), Tungsten Inert Gas (TIG)
- Continues practical operations in the use of tungsten arc welding and equipment. Studies equipment operation setup, safety, and practice of Gas Tungsten Arc Welding (GTAW), Tungsten Inert Gas (TIG).Lecture 2 hours. Laboratory 3 hours. Total 5 hours per week.
Prerequisite: WEL 1643 credits - WEL 175 - Semi-Automatic Processes
- Introduces Semi Automatic Processes performed with Carbon Steel. Emphasizes practical applications in field techniques. Includes the study of filler wires, fluxes and cover gasses.Lecture 2 hours. Laboratory 3-6 hours. Total 5-8 hours per week.
3-4 credits - WEL 190 - Coordinated Internship
- Supervises on-the-job training in selected business, industrial or service firms coordinated by the college.Credit/practice ratio not to exceed 1:5 hours. May be repeated for credit. Variable hours.
1-5 credits - WEL 195 - Topics In
- Provides an opportunity to explore topical areas of interest to or needed by students.May be used also for special honors courses. May be repeated for credit. Variable hours.
1-5 credits - WEL 196 - On-Site Training
- Specializes in career orientation and training program without pay in selected businesses and industry, supervised and coordinated by the college.Credit/work ratio not to exceed 1:5 hours. May be repeated for credit. Variable hours.
1-5 credits - WEL 197 - Cooperative Education
- Supervises in on-the-job training for pay in approved business, industrial and service firms, coordinated by the college's cooperative education office. Is applicable to all occupational- technical curricula at the discretion of the college.Credit/work ratio not to exceed 1:5 hours. May be repeated for credit. Variable hours.
1-5 credits - WEL 198 - Seminar and Project
- Requires completion of a project or research report related to the student's occupational objectives and a study of approaches to the selection and pursuit of career opportunities in the field.May be repeated for credit. Variable hours.
1-5 credits - WEL 199 - Supervised Study
- Assigns problems for independent study incorporating previous instruction and supervised by the instructor.May be repeated for credit. Variable hours.
1-5 credits - WEL 250 - Welding Quality Control & Inspection
- Teaches techniques and practices of inspection, and interpretation of tests and measurements. Includes weld chemistry, destructive testing and nondestructive examination.Lecture 2 hours. Laboratory 2 hours. Total 4 hours per week.
3 credits - WEL 290 - Coordinated Internship
- Supervises on-the-job training in selected business, industrial or service firms coordinated by the college.Credit/practice ratio not to exceed 1:5 hours. May be repeated for credit. Variable hours.
1-5 credits - WEL 295 - Topics In
- Provides an opportunity to explore topical areas of interest to or needed by students.May be used also for special honors courses. May be repeated for credit. Variable hours.
1-5 credits - WEL 296 - On-Site Training
- Specializes in career orientation and training program without pay in selected businesses and industry, supervised and coordinated by the college.Credit/work ratio not to exceed 1:5 hours. May be repeated for credit. Variable hours.
1-5 credits - WEL 297 - Cooperative Education
- Supervises in on-the-job training for pay in approved business, industrial and service firms, coordinated by the college's cooperative education office. Is applicable to all occupational- technical curricula at the discretion of the college.Credit/work ratio not to exceed 1:5 hours. May be repeated for credit. Variable hours.
1-5 credits - WEL 298 - Seminar and Project
- Requires completion of a project or research report related to the student's occupational objectives and a study of approaches to the selection and pursuit of career opportunities in the field.May be repeated for credit. Variable hours.
1-5 credits - WEL 299 - Supervised Study
- Assigns problems for independent study incorporating previous instruction and supervised by the instructor.May be repeated for credit. Variable hours.
1-5 credits